11
11

Geomembrane manufacturers: What is the role of geomembrane?

RELEASE TIME :

2022-02-21 13:47

Composite geomembrane is an anti-permeation substrate of plastic film. It is an anti-permeation material made of geomembrane composited with non-woven fabric. Its anti-permeation performance mainly depends on the anti-permeation performance of plastic film. According to geomembrane manufacturers, at present, the plastic films used in anti-permeation applications at home and abroad are mainly polyvinyl chloride (PVC) and polyethylene (PE), which are polymer chemical flexible materials with small specific gravity, strong ductility and high adaptability.

_z9T98NjSnSRkNERQp6faQ.jpg

Corrosion resistance, low temperature resistance, good cold resistance. The main mechanism is that the imperviousness of the plastic film intercepts the leakage channel of the earth dam, withstands the water pressure with greater tensile strength and elongation, and adapts to the deformation of the dam. Non-woven fabrics are also high-molecular staple fiber chemicals, which have high tensile strength and ductility through impregnation or thermal viscosity. Combining with plastic films not only increases the tensile strength and puncture resistance of plastic films, but also due to non-woven The surface of the cloth is rough, which increases the friction coefficient of the contact surface and contributes to the stability of the composite geomembrane and the protective layer. At the same time, they have good corrosion resistance to bacteria and chemical effects, and are not afraid of acid, alkali and salt erosion.

The anti-seepage film is made of high-density polyethylene virgin resin, which is made of co-extrusion technology. It has molecular density and low liquid permeability. It has an anti-seepage effect that cannot be compared with general waterproof materials, and the anti-seepage effect is good.

The geomembrane manufacturer said that the service life of the composite geomembrane mainly depends on whether the plastic film has lost its penetration and waterproof effect. According to the Soviet national standard, the polyethylene film with a thickness of 0.2m and a stabilizer used for hydraulic engineering can be used under clear water conditions. The working life can reach 40~50 years, and the working life under sewage conditions is 30~40 years. Therefore, the service life of the composite geomembrane is sufficient to meet the anti-seepage requirements of the dam.

Determination of the scope of film laying

The Zhoudu Reservoir Dam was originally a deep wall dam, but with the collapse of the dam, the upper part of the deep wall was broken. In order to solve the problem of anti-seepage at the upper part, the original anti-seepage inclined wall was added. According to the safety demonstration and analysis of the Zhoutou Reservoir dam, in order to solve the leakage of weak surface and dam foundation leakage caused by multiple landslides of the dam, curtain grouting on the bedrock surface, grouting on the contact surface, Throw wells and fill curtains, GOSFREY permeable board walls and other permeable bodies. The upper inclined wall part is covered with composite geomembrane for infiltration, and the lower part coincides with the vertical anti-seepage wall, rising to a height of 358.0 meters (0.97 meters above the flood level inspection).

Type selection of composite geomembrane

Geomembrane manufacturers pointed out that there are currently many factories producing geomembrane in China, and the product specifications are also varied. One cloth and one film, one cloth and two films, two cloth and one film, two cloth and two films, multiple cloth and multiple films, etc. The models are 200g/m2~1000g/m2, etc. Users can make requirements according to their actual conditions, and geomembrane manufacturers can produce them separately according to requirements.

 

Previous Page

Summary of the principle of use of bentonite waterproof blanket and points for attention

Geomembrane manufacturers: What are the functions of geomembrane and composite geomembrane?

Next Page

Previous Page

Summary of the principle of use of bentonite waterproof blanket and points for attention

Next Page

Geomembrane manufacturers: What are the functions of geomembrane and composite geomembrane?

RELATED NEWS

图片名称

What is the function of the waterproof board?

Waterproof plate is mainly used for earthwork dam, rockfill dam, masonry dam, concrete dam, tailings dam, sewage reservoir dam, channel, liquid storage tank and other engineering seepage prevention, subway, basement, tunnel seepage prevention lining, highway, railway foundation seepage prevention, as well as the use of filament geotextile and bentonite waterproof blanket geotextile materials in household waste landfill.

2022/11/14 15:47

图片名称

Precautions for waterproof board construction

Precautions for waterproof board construction Tunnel and underground engineering waterproof system failure refers to the use of waterproof systems and materials, due to external effects of erosion damage or weakening of internal materials, resulting in weakened or complete loss of the ability to resist the groundwater environment.

2022/11/03 11:58

图片名称

What are the characteristics of the waterproof plate

What are the characteristics of the waterproof board? HDPE waterproof board (new HDPE waterproof board) adopts three-layer co-extrusion technology, using the world's most advanced automatic geotextile production equipment and high quality low pressure high density polyethylene raw materials, carbon black, anti-aging agent, antioxidant, ultraviolet absorber

2022/10/24 14:32

图片名称

What is the purpose of the waterproof plate

function The basic function of the waterproof board is to control the leakage of gas and gas evaporation. The importance of the waterproof board in the rock engineering is mostly seepage prevention and protection, but at the same time, it also has the effect of promotion and protection. Its key application in: gravity dam, rockfill dam, masonry dam,

2022/10/08 16:06